Vietnam

ANSI PC Chain


 

Home » Products » Chain » Drive Chain » Anti Corrosion Chain » PC Series » ANSI PC

 

ANSI PC Chain

The pins and pin link plates of these chains are made of SUS304 (spring clips SUS301). Engineering Plastic (white) is used for the inner link. This combination makes it a lube-free, low noise (5 dB lower than ANSI standard roller chain) and lightweight chain (50% lighter than ANSI standard roller chain). Working temperature range: -20°C to +80°C. For details on corrosion resistance, please check out our Corrosion Resistance Guide.

For more detailed information and to download CAD data about click here

Single Strand Details

pc
tsubaki-ansi-pc-single
Dimensions in mm
Tsubaki Chain No. Pitch (P) Bush Diameter Inner Width
mm Inch R W
RS25-PC-1 6.35 ¼" 3.30 3.18
RS35-PC-1 9.525 ⅜" 5.08 4.78
RS40-PC-1 12.70 ½" 7.92 7.95
RS50-PC-1 15.875 ⅝" 10.16 9.53
RS60-PC-1 19.05 ¾" 11.91 12.70
Dimensions in mm
Tsubaki Chain No. Pin Link Plate Max.
Allowable
Load
Approx.
Mass
Diameter Length Thickness Height
D L1 L2 T1 T2 H kN Kg/M
RS25-PC-1 2.31 4.50 5.50 0.75 1.30 6.00 0.08 0.095
RS35-PC-1 3.59 6.85 7.85 1.25 2.20 9.00 0.18 0.22
RS40-PC-1 3.97 8.25 9.95 1.50 1.50 12.00 0.44 0.39
RS50-PC-1 5.09 10.30 12.00 2.00 2.00 15.00 0.69 0.58
RS60-PC-1 5.96 12.85 14.75 2.40 2.40 18.10 0.88 0.82
  • Make sure to check the chain tension again when replacing Stainless Steel Chain with PC Chain.
  • Offset links are not available.
  • For details on corrosion resistance selection, please see our Corrosion Resistance Guide.

Find the PC Chain details information in G8 Drive Chain and Sprocket Catalog